these are 9/10 identical to zeal stabs, the only difference I can tell is in the screws that are provided, so for the cost I'd say they are worth it  update: I've also noticed when placing the wire into the stem, zeal stabs are a tighter fit at first but afterwards they feel the same, not sure if that is helpful but thought it was worth mentioning

9/10 zeal stab clones

 So I go looking and course the others show up on Aliexpress, kprepublic, etc. Low and behold see these are sold on Amazon. Buy two sets to replace on my current boards, and man they're great. Lubed of course, but even stock they were a lot better than the cherry or GMK I had used previously

 Buy two sets to replace on my current boards, and man they're great. Lubed of course, but even stock they were a lot better than the cherry or GMK I had used previously. Would definitely recommend picking up a pair. But, do make sure you get some #2/M2 washers (fiber or vinyl) as they do not come with any, and you don't want to short anything on the board

 Would definitely recommend picking up a pair. But, do make sure you get some #2/M2 washers (fiber or vinyl) as they do not come with any, and you don't want to short anything on the board.

These are the exact same as Durock/Everglide Stabs, but with Prime shipping! Absolutely recommend.

Rattly Bent Spacebar Wires

Good stabilizers but needed some work

Chunky stabs! Very solid and a nice improvement to any kb.

Used these for a build (DZ60RGB, Tofu60, Holy Panda, Alu-plate) a month ago because they were eligible for Amazon Prime and would arrive in two days. After a month of solid use for typing and gaming, I can confidently say that there is no functional difference between these and genuine Zeal stabs, which I've used in a previous build. Lubed with Krytox and teflon grease, they're smooth, sound nice, and don't really rattle much. Installation was also simple since there is no clipping required

 Lubed with Krytox and teflon grease, they're smooth, sound nice, and don't really rattle much. Installation was also simple since there is no clipping required. Plus, there are more colorways (like the gray ones I used here).

Nice Quality Zeal Clone

 I threw the old stabs in the garbage and if I ever am making another plate mount build again these have gone from an "I'll try it" to a must. I can't recommend these enough, they change the game when it comes to plate mount boards.

 $10 for a set sounded great, so I ordered them.  They arrived, and without even thinking I holee modded and lubed them, then stuck them in my keyboard and now everything sounds wonderful. I threw the old stabs in the garbage and if I ever am making another plate mount build again these have gone from an "I'll try it" to a must. I can't recommend these enough, they change the game when it comes to plate mount boards

Best Plate Mount Option you can Buy

These stabs fit perfectly with my GMMK pro with the stock aluminum plate, They bring this keyboard to life! The stock "goat" stabs are garbage, these are your perfect replacements

The stabs you need for your GMMK PRO

 It required a lot of fine-motor detail work but not good results for me. I opted for full replacement, as the kits weren't terribly expensive.  The stabilizers aren't difficult to assemble and it was helpful comparing to the old stabilizers to get parts in correctly. Once they were assembled and on the board, these stabilizers were better than those on any of my other keyboards

 I eventually removed the stabilizers from another GMMK with my Zealios 65gs (personal fave) and replaced that for "daily driving". Needless to say, the product worked ideally, as it quickly graduated into my favorite setup.

  The stabilizers aren't difficult to assemble and it was helpful comparing to the old stabilizers to get parts in correctly. Once they were assembled and on the board, these stabilizers were better than those on any of my other keyboards. I eventually removed the stabilizers from another GMMK with my Zealios 65gs (personal fave) and replaced that for "daily driving". Needless to say, the product worked ideally, as it quickly graduated into my favorite setup

Durock V2 Stabilizers Screw-In