Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

The Barrage is the first to feature the AXIS Assist. They offer quick, one-handed manual assist opening and can be operated equally with either hand. Intended for Everyday use, our Barrage family has a standard clip type with a reversible tip-up clip position. The Mini Barrage 585 has a lanyard hole. Specifications: Designer: Osborne | Mechanism: AXIS-Assist | Action: Assisted-opening | Blade Steel: 154CM (58-61 HRC) | Blade Length: 2.91" (7.39cm) | Blade Thickness: 0.100" (2.54mm) | Open Length: 6.91" (17.55cm) | Closed Length: 4.00" (10.16cm) | Handle Thickness: 0.57" (14.48mm) | Weight: 3.40oz. (109.71g).

OutdoorGearLab

Built for precision with a design that has helped it maintain its top status for years, the Benchmade Mini-Barrage 585 has a blade that arrives razor-sharp, and its LifeSharp sharpening service sweetens the deal even further. If you cover shipping costs, Benchmade will return the edge to factory specifications throughout the life of the knife. The handle fits in the palm well and tucks easily into a pants pocket. Pocket clip carry is modular; you can wear it on either side. An assisted opening system, deployable by either hand, reliably pulls the blade to ready status. One can safely lock the blade in the closed position while carrying it in a pocket or purse.
The Mini-Barrage 585 is pricey, but you will undoubtedly realize its value over a long lifespan, especially with Benchmade's LifeSharp service. However, the initial investment may be too much if you are someone who easily misplaces items like this. Also, its slightly down-sized stature will be noticeable for heavy tasks and frequent usage. It is better than our other top award winner but is still a little more compact than ideal for super-extended use. Any bigger pocket knife will likely be too heavy to carry daily and everywhere. As long as you aren't using it for hours and hours a day and as long as you can keep track of it long enough to realize the investment, the Mini-Barrage earns our strongest endorsement. This is the knife we recommend most for everyday carry. 
Read more: Benchmade Mini-Barrage 585 review

Best for Most

amazon.com

VinnieNiZero

 Can we choke? Not really. I wouldn't suggest that this is very sharp for here. So to release, we'll pull on both sides of this access lock. So we'll pull this position and it is spring loaded

 Hello! Here I have a mini barrage from Benchmade. It's number is 585. This knife was sent to me for review. Let's take a look at it

 This knife was sent to me for review. Let's take a look at it. So these holes here and the emblem there, let's get that. You can see the emblem there

 Very forgiving belt clip. And there is a spring lock here. So this is in the open position. You're going to push down this way and push up for the locking position

Benchmade Mini Barrage 585 review

 Hello! Here I have a mini barrage from Benchmade. It's number is 585. This knife was sent to

 me for review. Let's take a look at it. So these holes here and the emblem there, let's

 get that. You can see the emblem there. There's a pocket clip either side. Knife tip up. Very

 forgiving belt clip. And there is a spring lock here. So this is in the open position.

 You're going to push down this way and push up for the locking position. And then so there's

 an access lock. Here's a thumb stud. You can see it is locked in place. It will not deploy.

 So this will go towards the jimping. Press down and pull. So it is very close to the jimping

 and it will open. I am very unfamiliar with Benchmade's Valox material. They also offer

 this in a G10. And this feels like a G10. But since I have no experience with the Valox,

 there is no way I can tell you what the huge difference is. So ambidextrous

 thumb studs. Let's see, can we do this? Thumb stud here. I'm holding it like that on the belt clip,

 sort of. Whoa! Super nice. Good edge. Good point. There's a clip on this. Very well

 sanded clip. And the user of this has not really done anything other than EDC it

 for the past 10 years. Very good edge retention. Incredible. Can we choke? Not really. I wouldn't

 suggest that this is very sharp for here. So to release, we'll pull on both sides of this access

 lock. So we'll pull this position and it is spring loaded. You can see that I'm letting go

 and there's the snap. So you will not be able to flick it closed. Let's see if we can do a reverse

 flick. So I guess thumb stud here. Not a lot of material. Nope. Nope. There we go.

 Huh. Well, I guess you need practice for that. Very gorgeous knife. Made in America. And there's a

 balance. Let's see. The balance is somewhere about right here. Let's check it out. Here? Maybe?

 Here? Maybe? Slightly? Nope. I didn't balance that. Just about where the access lock is.

 It's a beautiful grind. And really nice grip. I don't know how much larger.

 I don't know. My fingers just like slide in these grooves right here. What is this other side for?

 Oh, like box. Like to cut a box or to tape. Nice. Very ergonomic. Excellent.

 So from my limited research, I found this to be about $155 as the base from Benchmade.com.

 And they don't necessarily make this exact grind anymore, but they do still sell this and it goes

 up from $155. You want a very reliable quality knife. This is high recommendation. Thank you

  Other than the clip, the knife itself is rock solid. Great assisted opening mechanism.

Excellent Knife - Just Wish The Clip Was Stronger

 That way, it does not ever fall open on its own. I carry my barrage in my pocket often and usually don't lock the blade shut with the switch on the knife, but it's probably a good practice to do. I've never had a problem though.  I'm not a huge fan of the plasticy scales (sides of the handle) that come with the knife, but I'd much rather have a stellar blade and locking mechanism than worry about the feel of the handles

 The axis locking mechanism is superb and holds the blade firmly in place with very little wiggle. With a pull on the release mechanism the blade is easy to close, and the way the release is positioned, it ensures your fingers are away from the blade as it's closing. But be careful as with any good knife -- it is sharp!!  The axis-assist open works very reliably and swiftly. As you use the thumb stud to push the blade out of the knife, it crosses a threshold (of about a centimeter open) where the knife opens on its own and locks into place

Great pocket knife

 It has a hollow plastic design that no doubt was to save weight due to the steel liners inside. Other reviews have pointed out that you get a cheap feeling due to this. I agree thus 4 stars instead of 5. I would have liked a more rubberized solid grip even at the expense of more weight! Put this into the Can't Get Everything You Want bucket

Benchmade 585

KaBar folding Hunter. Specifications: - overall length: 8.875" - blade length: 3.875" - handle: G10 - blade stamp: Ka-Bar - steel: 420 SS - thickness: 0.1" - grind: hollow - HRc: 52-54 - weight: 0.35 oz

smkw.com

walmart.com

knifenews.com

bladereviews.com

targetswattitude

Donnie B All Day

KnifeReview 3000

Canadian Cutting Edge

 So that's not a bad price. For a K bar o'clock knife, you know of this style real g10. You know it's a decent knife, Canadian prices for this amazon.ca - that's Canada's Amazon has it for 3167

 You'Ve got a little over half of an inch of the knife, sticking out, not quite three quarters of an inch and you've got that sort of dull gray color. So it's not too visible. People aren't gon na see it for easily in a pair of blue jeans. But yes, it is there, it's not a high gloss, but it's not a complete matte finish either and the pocket clip you can hear it

 Twelve point: seven centimeters five inches almost exactly the grip area between my fingernails of my pinky's right here is eleven point: four centimeters four and a half inches the handle thickness back here, not counting the pocket that one point one six centimeters, which is point four. Five. Five inches of just under half of an inch thick, and I did it again - I didn't do the conversion into inches. The total length of this knife is twenty-two point two five centimeters thread around eight and three-quarter inches

 On this one of the advantages of a softer steel, is it's going to be easier to sharpen? So if you do use this and you need to sharpen often all you will need to sharp them more often, but sometimes you just want a softer steel depending on what you're cutting if you're cutting certain things more regularly and if you want an easy job of Sharpening your knife, another good reason to get a blade with 420 is, if you're learning how to sharpen, because it'll go more quickly, you know start teaching you the skills and will start giving you the muscle memory, no matter what style of sharpener that you use. If you do completely hand sharpening on a whetstone or if you use a system where you're sliding a abrasive pad across all of them requires some muscle memory, they require practice, they require learning and often a softer Steel's good. For that, for the learning process, the we've got hex screws. Those are allen keys right there for the pivot, so you can adjust it if you want to, which is a good thing

Review of the Ka Bar 3189 Folding Hunter STR

 I can't do it um personal preference aside. I just can't dang it for being tipped down, says tip up, but i hope you enjoyed. I hope you learned a little bit um good lord one, quick, don't rise i'll, be able to take this out to the hunting property sometime this hunting season and do a second review of it out under field conditions, because it definitely looks like it deserves that, we'll Just have to see in the meantime i hope you enjoyed. I hope you learned a little bit something new and we'll see you again on monday

 Let'S see how it does on cardboard, tip went through beautifully okay. That happened nicely: okay, okay, man, making very fast work with cardboard, so that's encouraging t-bottle. Let'S see how it does for hang packaging, not that you normally use a hunting knife for hank packaging, but you know if it's what you got in your pocket wow. It went right in beautifully okay, so i did that beautifully

 Shall we, if you're new, to the channel, welcome here on fridays, we do mainly knife reviews, so occasionally i'll do a view of some associated survival or camping gear. You know cooking equipment, lights, compasses, that sort of thing and on mondays we do knife basics. What you really need to know that one is aimed more at those who are new to the world of knives, with an occasional bit thrown in for those who've been in the field for a while. It'S aimed so that uh, those who are just starting to get into knives we'll have a way to figure out what we're talking about when we start throwing some of these terms around not just that they're going um, yeah, okay, i guess for those of you who Have been with us for a while welcome back, i'm glad you showed up again got just one question for you: have you subscribed yet? Yes, i know i ask it every week and some of you give me the same argument every week

 It'S got a very nice clip point and it's nice, it's fairly comfortable hand. It'S five inches closed, a 3.875 inch blade. It is a lock back, unlike the buck, it's got thumb studs, so you can open it one-handed

The Ka Bar Folding Hunter Lockback - A New Classic?

I buy many things from Amazon and this was a recent purchase! I waited before reviewing to have real information to report. I never received discounts not made available to the public and offer honest reviews as a token of gratitude for Amazon Support following up on every bad experience.  Delivery: 2 days from purchase via Amazon Logistics (Sometimes there is a delay from *purchase to when retailer *provides to Amazon)  Packaging: Authentic manufacturer box inside of Amazon box but no insulation between, yet undamaged (You would be surprised how integrity varies from purchase to purchase)  Product: Genuine Ka-Bar product with manufacturer box taped closed, looked brand new. Item was 99% flawless but Ka-bar has been known to have some dings and nicks here and there

Benchmade 585 Mini Barrage vs Ka-Bar Folding Hunter Lockback Knife

Reviews by Topic

Blade

Weight

QUICK QUESTION!

You might also like