Name: Corsair LL120 RGB
Brand: Corsair
SKU: 639ad2297428e3b1f499191f
Rating: 3.2 (48 reviews)

Hiking Boots/Shoes Recommendations?

Hiking boot recommendations?

Any recommendations for women's hiking shoes?

[Request] Hiking/outdoorsy style shoes that can handle lots of walking on concrete

Cold and wet weather hiking boots recommendations?

I am in need of a new pair of trail/hiking boots.

Hiking Boots for heavy use during the summer

Good pair of hiking shoes?

[Request] waterproof hiking shoes

[request] - Good quality walking shoes.

Hello Redditors. I'm in search of a classy yet extremely durable pair of hiking boots to take backpacking around the world for 12+ months with.

Hiking boots recommendations

Men's three season "urban hiker" (like Merrell MOAB but longer lasting)

BIFL Hiking boots for women

Hiking boots with good traction and can stand up to abuse.

Looking for a good pair of shoes for my weird feet

Request - Hiking Sandals

Request: Hiking Boots

Comfortable and cushiony shoes for walking on pavement 10KM/couple hours a day (UK)

Hiking sandals that last?

[Request] Powerful dishwasher with sanitize function?

I want the best god damned dishwasher money can buy.

Looking for the best, easiest to operate, cheapest dishwasher - Recommendation?

[Request] Best countertop dishwasher for reasonable price?

Can anyone recommend a good dishwasher?

Countertop/Portable Dishwasher

[Request] Dishwasher &lt;$1k Australian with QOL features and low water use

Dishwasher for Second Home

My friend bought a house with this KichenAid dishwasher from 1974. He says it works better than any of the other ones he has owned. He just has to convince his wife not to replace it.

What's a good Panel ready dishwasher under $1k?

Best socket set on the market $100-$150

[Request] Socket wrenches

I need a recommendation for a tool set that should last a lifetime. [Request]

Looking for a Mechanics tool set.

23 years later; GM Goodwrench socket set.

A Starter/Lifetime Tool set

Basic screwdriver set needed

Mechanic Tools that are BIFL

Trying to fill a tool roll for my truck and would like input on BFL tools like wrenches, pliers, socket sets, etc.

BIFL: Mastercraft ratchet set with lifetime warranty. Got it at 14, im 31. Went thru more abuse than you think!

Looking to upgrade my home hand tools

Was told to post this here. Husky 270pc toolset from Home Depot for $99, normally $199. Lifetime warranty too

[Request] Ratchet/Wrench/Etc tool set for home/bicycle/general use

Thoughts on a Honda Accord V6 2007?

2010 Honda Accord worth the buy?

Thoughts on a 2008 Honda accord v6 coupe EX-L?

2014 honda accord ??

After an initial round of research it seems like Honda Accord Hybrid is the right answer, but I want to pressure test that with you guys

2014 Accord V6 Touring (any thoughts?)

Which car ?

me again. 2010 2dr honda accord, 122k miles for $5,800. just want a reliable first car, thoughts?

Want to buy an Accord, any suggestions?

2020/2021 Honda Accord LX - Tell Me About Your Likes/Dislikes

Compact - Midsize suv

best small/midsize suv?

Looking for a used (06-14) reliable compact/mid-size SUV

compact/mid size suv

Midsize SUV

Recommendations for midsized SUVs to look at

Compact to Mid-Size SUV

Small to mid-size suv suggestions?

Midsize vehicle for three kids

Mid-Size SUV

Just tried a Lotus Elise Cup 250, driving impressions !

Dan Neil reviews Lotus Emira: As Good As It Gets

Considering a Lotus Elise - USA

How affordable are Lotus Elises from the 2005-2012 model year?

Lotus Exige Sport Final Edition review: farewell, Exige

I wanna know everything you know about a 2005 Lotus Elise

My Lotus Evora Review

Lotus retail sales up 24% in best performance for a decade

2022 Lotus Emira Looks to Be One of the Brand's Best

PURCHASING A LOTUS — Need Tips + Advice.

Looking for a good rpg/action adventure with a good story and good characters

Deep long rpgs?

Looking for a story-focused RPG

Looking for a complex RPG

Fantasy games with an detailed and immersive world?

[WSIB] I am in search for a open world RPG that will keep me busy for hundreds of hours.

Open world game with huge map, lots of things to do, and great graphics

WSIB Feeling a bit of an rpg lull and want something exciting like old school BioWare with a engaging story that doesn’t take 100 hours to play.

WSIB: long, immersive games with high quality storytelling and writing

looking for an open-world rpg

[WSIB] A turn based strategy game that isn’t 4X

Turn-based strategy game

Turn-based strategy games

[WSIB] Small-scale, medieval, strategy game, featuring pikemen and cavalry

(WSIB) Turn-based ”wargaming” game

[WSIB] Turn Based Strategy games

WSIB if I want a strategy game for dummies

WSIB Strategic Rpg

[WSIB] Good offline strategy/(ish) games?

What are some good "smaller scale to control, but still feel large scale battle" tactical / strategy games?

Bullet Hell-Type Games: Atomicrops vs. I, Dracula: Genesis vs. Others?

WSIB if i want a completely story driven indie game but have already played undertale and oneshot (preferably similar to those 2)

Post apocalyptic enthusiast, Underrail or Atom RPG?

[SIB] Undermine or Atomicrops

WSIB if I like "Run into things, need to grow in power/special items to move further so I come back after unlocking said element" type of games.

Blsoodborne or Resident evil 2 ?

What should I buy? Animal Crossing: New Horizons or Doom: Eternal

[WSIB] Fast-paced top-down roguelikes?

[SIB] I Hate Running Backwards or Planetary Dustoff? Or something else?

SIB Nuclear Throne?

What can you recommend for minimizing pores?

I know you can’t get rid of pores but I’m wondering is there anyway to make them smaller? I use La Roche Posay products. They keep my acne mostly at bay but I feel like my pores are just so large. Part of it is genetic, but just wondering if there’s anything else I can do at home to help. Thanks!

OPEN PORES- WHAT TO DO? IS THERE ANY PRODUCT I CAN USE?

What skincare products have you used that helped with large pores?

What is the best thing to use to tighten pores on your face?

Can anyone tell me why my pores are so huge and what I can do to minimize them?

How to reduce pores.

Hey guys, how do I make my pores not look like this? Info in comments (deleted and reposted for an error in the title)

Pores reduction tips?

Advice for shrinking pores on and around nose?

[sun care] sunscreen that doesn’t irritate rosacea and perioral dermatitis

[Sun Care] Looking for sunscreen that doesn't irritate Rosacea

Sunscreen recommendations for rosacea

Looking for a sunscreen for my acne prone skin.

[Sun Care] looking for a sunscreen that works well for people with Eczema.

Desperate for a good sunscreen

Looking for a Daily Suncreen

I’ve tried them all and I still can’t find my holy grail for my dry rosacea skin. Any other recommendations?

Sunscreen, eczema and makeup, Help [Sun care]

[Sun Care] Help with not being able to use Sunscreen

How can i stop a really greasy face?

How to best defeat oily skin?

Is there any long-lasting solution for oily face?

Oily Face -&gt; Wash Face -&gt; More Oily

Extremely oily skin

Y’all know some sort of cream or product I can buy to make my face less greasy looking?

super oily face help needed

Oily Skin— please help!

Really oily skin

How to have less oily skin?

Adrian Krebs

Johannes Engler

Tavis Lochhead

The Corsair LL120 RGB PWM fan combines excellent airflow, low noise operation and 16 brilliant independent RGB LEDs, spread between two separate light loops that encircle the fan and its hub. Pair with the included Corsair lighting Node Pro to customize lighting with a wide array of vivid effects and patterns. Using an optimized 120mm fan blade and PWM control, set the speed of the fan anywhere from 600 RPM to 1, 500 RPM for precise noise and airflow adjustment. Made for those seeking excellent airflow, quiet operation, and powerful lighting, the Corsair LL120 RGB fan puts your PC back in the loop.

amazon.com

TechReflex

Last Game Hunter

Gear Seekers

Bitwit

r/gamingpc

r/pcmasterrace

r/buildapc

r/sffpc

r/battlestations

r/Corsair

Corsair LL120 RGB Fans Review + ALL Effects! BEST RGB Fans Ever?!?

It’s been years since my last totally new build, and wanted to share what I learned about making my new PC into a spectacular neon rainbow over the last month. My kids thought my old computer was "so boring" compared to my sister's so I knew I had to bring my A+ game with rainbow explosion RGB :)

I’ll start out by saying that figuring all this out has been by far the most confusing and frustrating part of my new build. Every time I thought I understood everything, there was always yet another exception to the rule. TLDR is at the bottom.

&amp;#x200B;

# The difference between RGB vs ARGB

The first and most crucial piece of information is that there are two types  of “RGB” for PCs:

* RGB = 4-pin 12V header = Every LED on the device must be the same color
* ARGB = Addressable RGB = 3-pin 5V header = You can control the color of each individual LED on the device

ARGB (also sometimes known as digital RGB) is far more flexible, can create way cooler effects, and it’s what most modern LED devices use. It's also a newer technology, so a lot of older "How to do RGB" posts/articles just assume you're using the 12V kind. Also  **you should never plug an ARGB 5V device into a RGB 12V header. Each type of device should be kept to its own type**. Some photos [comparing ARGB vs RGB headers can be found here.](https://rog.asus.com/forum/showthread.php?110272-What-do-5v-and-12v-RGB-cables-look-like-you-ask)

What makes it very confusing is a lot of product listings and articles (like my post title!) just say "RGB" without specifying which type they're referring to until you dig deeper into the specs.

&amp;#x200B;

# The different ARGB connector types

Adding to this cluster-mess is that most 5V 3-pin ARGB devices use a 4-pin footprint which have one of the pins left off so there's only 3 physical metal pins. But because nothing can be easy, there are also some ARGB devices that use a 3-pin footprint instead (JST-SM 3 pin).  [This image shows the two different ARGB connector types.](https://imgur.com/DZO00eh)  


Because of this, some ARGB devices include a cable compatible with both types of ARGB headers. But other ARGB devices only provide one option and you'd need an adapter if it's the wrong type of your setup. This very important detail isn't always listed in the product description either because it’ll just say “3-pin Addressable RGB” without specifying which types of headers are supported, making it extremely frustrating and confusing. In an attempt to keep it clear in this document I’ll use the following abbreviations which I’ve made up just now (if there  arebetter ones, let me know and I'll update):

**3P3F** \- 3-pin Addressable RGB header with a 3-pin JST-SM footprint. Sometimes also called a DGV connector (Data, Ground, Voltage)

**3P4F** \- 3 pin Addressable RGB header with a 4-pin footprint (3 physical metal pins as one pin is left off) - used by most ARGB devices and motherboards

&amp;#x200B;

&amp;#x200B;

# How do I control all the lights in my PC so I can make a cool Cyberpunk 2077 theme?

Modern motherboards usually include both 5V ARGB and 12V RGB headers which can be used to control your lights via their respective motherboard utility software (MSI Dragon Center Mystic Light/ASUS Aura Sync/etc). These motherboard headers can be named a variety of things depending on the manufacturer. On my MSI board the 5V ARGB header is called JRAINBOW while the 12V RGB header is called JRGB.

For ARGB, most motherboards (Asus/MSI/ASRock) use the 3P4F header for ARGB, but other motherboards (Gigabyte) use the 3P3F header for ARGB. Yes, it’s a confusing mess.

Older motherboards might just have a 12V 4-pin RGB header or even more depressing, no RGB header at all! We’ll cover that case a bit further down.

And to add insult to injury, some manufacturers created proprietary headers/protocols (like some 5-pin fans) that plug into their own proprietary light controllers which are then controlled via USB.

&amp;#x200B;

&amp;#x200B;

# How do RGB fans work?

The fans typically come with two cables connected to them: one for controlling the fan speed (like any other fan) and the other for controlling the LEDs. However some fans have a 3P4F header while other fans have a 3P3F header, and some fans provide both types of connectors. Also remember that double the cables, double the cable management!

There’s also some fan “kits” that come with an ARGB hub that all the fans ARGB cables plug into and then you can control the LEDs with a wired remote. This is more common if you buy a 2, 3, or 4 pack of ARGB fans together as one package.

&amp;#x200B;

&amp;#x200B;

&amp;#x200B;

# I have 20 ARGB fans for my case and only 1 ARGB header, what do I do?

Most motherboards only come with one or two ARGB headers. You have a few options

1. Use a [simple splitter](https://www.amazon.com/gp/product/B07Z122WPT/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&amp;psc=1) \- Straight forward and cheap. You connect it to your motherboard's ARGB header. However whatever color/pattern is used on the longest device will be the color/pattern used for all the other devices connected to the splitter. So if you set a 12-LED pattern (like a rainbow) with three devices connected to the splitter - a 12 LED strip shows all 12, a 6 LED fan shows the first 6 of the pattern, and a 3 LED fan shows just the first 3 of the pattern. So all devices connected to the splitter will be mirrored. This may or may not matter to you based on how you want to light your system. Also each ARGB device has an amount of max current it could use, so you want to make sure the sum of all those devices hanging off the splitter is less than what your motherboard supports (usually around 3A).
2. Some devices allow you to daisy-chain them together so you only need one motherboard header to connect multiple LED strips/fans (think of how your Christmas lights chain together). You'd have to determine if your particular device can do this as some devices have a connector to support this and some don't. It has the same limitations as using a splitter though.
3. Use a [hub](https://www.amazon.com/Splitter-PMMA-Magnetic-Standoff-Controller/dp/B07T58RVZ7/ref=sr_1_10?dchild=1&amp;keywords=argb+hub&amp;qid=1607533535&amp;s=electronics&amp;sr=1-10) \- Typically an ARGB hub works just like a splitter and is connected to your motherboard's ARGB header, but also includes a connection for power (usually provided by a SATA power connector from your PSU), so you can power more LEDs/devices than a splitter. But it still has the same mirror coloring limitation, which may or may not be important to you. Some fan kits (especially if you buy a 2 or 3 pack) come with a hub included.
4. Use an [ARGB controller](https://www.razer.com/gaming-pc-accessories/razer-chroma-addressable-rgb-controller/RZ34-02140600-R3U1) \- The most flexible option because each device you connect to the controller can have unique colors/patterns and won't have to be mirrored. It’s typically controlled via an internal USB header on your motherboard and does not use the ARGB header on the motherboard at all. It also allows you to control the lights without having to use the motherboard software. I went this route and **\*highly\*** recommend it.

Keep in mind that there are also power limitations to consider. Some LED devices have their own SATA power connector to get around this limitation, while others just use the ARGB header 5V power which will then have a limit on how many fans/strips you can daisy chain or split off. That particular limit will be motherboard dependent and also dependent on the power draw of the LED device(s), which should be listed somewhere in the motherboard specs. But the end result is that you can’t actually control 20 ARGB devices off a single ARGB header because the LEDs would get way too dim.

&amp;#x200B;

&amp;#x200B;

# I don’t have a RGB or ARGB header on my motherboard, how can I turn my PC into a rainbow explosion?

There’s two options:

1. Make sure the LED device you’re interested in comes with its own remote. The drawback for a physical remote is that it might be complicated to get that remote outside your case if it’s a wired remote (and most are wired remotes), so anytime you want to change the colors/patterns you would need to pop open your case. This may or may not be a big deal for you.
2. Buy a hardware kit to control the LEDs like the Razer Addressable RGB controller I mentioned above which uses an internal USB connector that almost all motherboards have.

# Now notes on my experiences with different devices:

* [Razer Addressable RGB Controller](https://www.razer.com/gaming-pc-accessories/razer-chroma-addressable-rgb-controller/RZ34-02140600-R3U1)**:**  By far the best purchase I made in my technicolor rainbow journey, this lets you connect 6 different ARGB devices and give them each unique colors/patterns. It works with ARGB devices that use the 3P4F header (3 physical pins in the 4-pin footprint). You use Razer’s Synapse3 software to design the lighting schemes. This software does have a bit of a learning curve, but is quite powerful as you can layer different effects. I’m a huge fan of this controller and since it’s only a few months old I don’t see it mentioned much, but I consider it a must-have for anyone who wants to seriously light up their PC. You can split/daisy chain on each of the ports too, for a maximum of 80 LEDs per port, or 240 LEDs in total. The fans I bought have 12 LEDs each so there’s quite a lot of headroom for daisy changing. It’s compatible with just about any ARGB device that uses the standard WS2812b LEDs that almost all ARGB devices use. It connects to the internal USB header on your motherboard so it's also compatible with just about every PC. You could also use a standard micro-B USB cable and connect it to an external USB port, so you could use it with desktop 5V ARGB light strips too. It also comes with tape to stick it to your PC or alternatively it has screw holes compatible with SSD mounting in your case (which is what I did). The one odd thing with this is it uses an old-school Molex connector for its power source instead of the “standard” SATA power connector which is a bit annoying to attach another cable to the PSU. There are Molex to SATA adapters available, but I didn’t try it so perhaps someone wants to be a guinea pig let us know how it goes.

&amp;#x200B;

* [G.Skill Neo Z RGB RAM](https://www.gskill.com/products/1/165/326/Trident-Z-Neo)**:** You control the RAM RGB using the RAM manufacturer’s software running on your PC. The G.Skill software is fairly configurable, I had no issues and I really like these RAM sticks in particular because they diffuse the light really smoothly.

&amp;#x200B;

* [Asus 3080 Video card](https://www.asus.com/us/Graphics-Cards/TUF-RTX3080-10G-GAMING/)**:** You use the video card manufacturer software to control the LEDs on your video card. So DragonCenter for MSI cards, Aura Sync for Asus cards, etc. The Asus 3080 I managed to snag just has a small logo LED so I turned it off because I already had so many LEDs going on in my system.

&amp;#x200B;

* [Lian Li Strimer Plus Power Cables](https://lian-li.com/product/strimer-2-24pin/)**:** I blew $100 on these but they were so worth it! These are extensions, so they’ll work with any power supply. The 24-pin Motherboard one comes with a controller, and you plug in both the motherboard and GPU extensions in that controller. You can use the controller as a physical remote, or alternatively you can connect the controller to a 3P4F ARGB header on your motherboard. You long press on the “mode” button to switch between the options.Make sure you get the “Plus” version which is newer and looks much better than the original version. It uses a SATA power connector and can get \*super\* bright. The normal GPU extension has a 6+2 and 6+2 connection, and there’s now also a new 8+8+8 GPU extension available for the RTX 3080/3090 cards that require it. The GPU extension comes with the option to drive it off a 3P4F ARGB header, so you don’t have to buy the 24-pin extension in order to get the controller if you don’t want to. But I’d highly recommend getting both. These are my favorite RGB devices in my build.One note, these Strimer Plus light strips have too many LEDs for the Razer ARGB controller, so if you try connecting it to the Razer controller, you’ll get an error and it’ll refuse to recognize it. I have them connected to my motherboard ARGB header directly.

&amp;#x200B;

* [DeepCool Castle EX 240mm AIO](https://www.gamerstorm.com/product/CPULIQUIDCOOLER/2019-05/1286_11185.shtml)**:** IMHO these are one of the best looking AIOs out there because you can remove the logo entirely or replace it with [your own custom one](https://www.reddit.com/r/Amd/comments/dqur7v/the_wife_made_me_a_custom_emblem_for_my_deepcool/). Includes a connection for both the 3P3F and 3P4F ARGB footprints so that’s a huge bonus too. Default fans were a bit loud though at 100% and replaced them with ARGB ones that are quieter.

&amp;#x200B;

* [DeepCool CF120 fans](https://www.deepcool.com/product/dcoolingaccessory/2018-05/12_8349.shtml)**:** Nice and cool 12 LED ARGB PWM fans. The stand-alone CF120 come with adapters so it works with both the 3P3F and 3P4F ARGB headers. Sadly the CF140 wasn’t available standalone, so I had to buy a 2-fan kit. The kit includes both a fan controller/splitter and an ARGB hub/splitter. Unfortunately the ARGB hub that came in the kit only includes one ARGB header adapter and I don't’ see anywhere that sells the adapter by itself. So both fans would have to be the same color/pattern, unless you buy another CF120 just to get an adapter. Which I did. RGB is a slippery slope!

&amp;#x200B;

* [Be Quiet 500DX case](https://www.bequiet.com/en/case/1854)**:** Has the standard 3P4F ARGB connection and hooked it up to the Razer controller and works and looks great. There’s a button on the front to control the LEDs by cycling through the options on each press if you don’t have a ARGB header. You hold down the button for 3 seconds to toggle between using the button or using the ARGB controller to controller the LEDs. Also the front panel strip and the interior top strip are mirrored, so you can’t make them unique colors from each other. It uses a SATA connector for power. Case is great too!

&amp;#x200B;

* [Razer BlackWidow Keyboard](https://www.razer.com/gaming-keyboards/Razer-BlackWidow-Elite/RZ03-02621800-R3M1)**:** Standard RGB mechanical keyboard, RGB is controlled via Razer’s Synapse3. You can do some cool effects triggered by specific keys you specify. It’s really nice to have both this keyboard and my ARGB controller controlled by the same software. The only disappointment is the lighting scheme isn’t saved to the keyboard memory, so if you use Linux or plug it anywhere else, it just defaults to a rainbow color.

&amp;#x200B;

* [Phantek Digital Halos](http://www.phanteks.com/HalosDigital.html)**:** I originally was going to go with these because they allow you to add LEDs to \*any\* case fan and can be cheaper than buying a ARGB fan if you already have boring non light up fans. So you can light up your Noctua NF-A12x25’s if you wanted and they look really good.

There are 2 different main lines:

* Halos RGB - 12V RGB with 18 LEDs (120mm) or 21 LEDs (140mm)
* Halos Digital - 5V ARGB with 30 LEDs for both sizes. Looks much better than the RGB version.

And then each line has two different versions: 

* Normal (non-Lux): Plastic frame, plain cable
* Lux: Aluminium frame, braided cable, and crucially, includes a 3P4F ARGB adapter.

I originally bought these not realizing that the normal non-Lux version only has a connection for a 3P3F  header, which is not compatible with my motherboard or the Razer controller. You can buy the adapter separately for $5 a pop, so I bought that, but all 4 adapters were \*super\* loose on the ARGB header and would fall out of both the Razer controller and motherboard headers. I really wanted to like these, but I had to return them because it just didn’t work well at all. I was also super annoyed I had to buy an adapter and wait a week to ship because Phantek’s product description doesn’t make it clear at all that it’s not compatible with the standard 3P4F ARGB header.

&amp;#x200B;

&amp;#x200B;

# Some last notes:

* Razer’s Synapse3 software theoretically has hooks to also control the RGB RAM and the MSI Mystic Light from inside the Synapse3 studio, but I found it to be very buggy and didn’t work well. Also while my RGB RAM has 8 LEDs, I could only control 4 of them with Synapse3. So that level of integration doesn't seem quite there yet. In the end I had to use 4 different Windows programs to control all the various devices (Synapse3, MSI DragonCenter, GSkill, and Asus Aura for the video card)
* There’s a subreddit dedicated to custom [Razer profiles](https://www.reddit.com/r/ChromaProfiles/) that you can download and use.
* I did not explore any of the Crucial RGB fans/controllers because they’re so expensive. I believe they use a proprietary connection though. I’m sure someone in the comments can provide more information on that ecosystem.
* RGB=Red, Green, Blue. Each color is made up of 8 bits to give 256 (2\^8) possible values for each color, and then all combined give the 256x256x256=16.7 million possible unique colors you see in marketing all the time.
* For anyone looking for the technical details, 12V RGB devices work by dedicating a line for Red, one for Green, and one for Blue and adjusting the voltages to adjust the colors. ARGB is more complex and [details can be found here.](https://electronics.stackexchange.com/questions/249162/how-does-an-addressable-led-in-a-strip-work)

&amp;#x200B;

Anyways, this is everything I wish I’d known when I started this whole process, so hopefully it can help someone else out too. I’ve always thought being a concert lighting engineer would be a fun job and this is the closest I’ll probably ever get. So while RGB isn’t for everyone, and like Crossfitters and vegans, you don’t have to ask someone if they don't like RGB, they’ll make sure to tell you, I’m extremely happy I went all out on the RGB!

&amp;#x200B;

* [PCPartPicker List](https://pcpartpicker.com/user/WikiFiki/saved/#view=Gw4899)
* [Photos](https://imgur.com/a/anxb5Kx)

**TLDR:** Buy 5V Addressable RGB (ARGB) devices that use the standard ARGB header and get a Razer Addressable RGB Controller which connects to your motherboard’s internal USB header. Now you’ve got something that’ll work with almost any PC and almost all ARGB devices.

A Beginner's Guide to RGB in 2021

  Now onto the actual review itself:  Noise Level: The only time you really notice these fans spinning is when they hit their top end of their default curve in ICUE (which you can easily change the curve in ICUE like i did to prevent them from getting too loud unless under a tremendous load and they need to go full blast, which they rarely ever do). Other Corsair fans and other brands have quieter fans, but it just depends on what you want as the consumer.  Ease of Install: I don't have to spell this out. Short screw for mounting to a case, long screw for the radiator

 Call that a manufacturer error, amazon error, or transport error, i don't care, the end result is still hit or miss. More so than the manufacturers website.  Now onto the actual review itself:  Noise Level: The only time you really notice these fans spinning is when they hit their top end of their default curve in ICUE (which you can easily change the curve in ICUE like i did to prevent them from getting too loud unless under a tremendous load and they need to go full blast, which they rarely ever do). Other Corsair fans and other brands have quieter fans, but it just depends on what you want as the consumer

Fantastic fans if you get a good batch.

RGB all the things

 They don't care because "Whatever you already bought it! We don't care!"  I have:  -Updated and re-flashed all the firmware for the controller and reinstalled iCUE -Checked all the connections -Even replaced the main controller thinking it was defective  Every fan seems to do this.. so it's either and issue with the controller itself or the iCUE software just not working  They look SO GOOD!!! When they work!! But they don't!! So forget it!! Look elsewhere because these are JUNK!!!

Maybe I had a bad batch...

 And then they've also got these rubber corners on both sides for anti-noise and vibration. That's helpful. Each of these fans have two cables coming off of them. One is a four-pin PWM cable that you can connect either to a system fan header on your motherboard, for example, or a fan hub, a fan controller, et cetera

 Yeah, I'm really excited to test these out actually. They look great in person, more on that later, but also how do they perform when it comes to radiators? Because I was actually looking at the Corsair page for these fans, and it said that they're case fans. It specifically said these are case fans, but then there was also a picture of a radiator as part of an AIO with two of these fans slapped onto it. So I'm like, okay, can they also be used for, do they perform well with radiators as well? Are they that versatile? Is it one or the other? Was there a mistake? So we're gonna be testing them out with an H110i liquid cooler later on, comparing them to the stock fans that come with that particular AIO

THE BEST RGB FANS ON THE MARKET...come with a price

Holy fuck. so im in the process of planning a watercooling build and am wondering what fans to get. there are WAY TOO MANY. and i cant find a good breakdown of which to get. please send help

<div class="md"><p>Holy fuck. so im in the process of planning a watercooling build and am wondering what fans to get. there are WAY TOO MANY. and i cant find a good breakdown of which to get. please send help</p>
</div>

Too many fans

Beautiful fans, terrible software

 I'll put a link down in the description to make your life a little bit easier so you don't have to go searching the Googles. And yeah, just continue with the installation. Click next a whole bunch of times. It is really, really easy to get this installed

 Now we're going to jump into Corsair's iCUE software to control all of these bits. Go on over to Corsair's website and download the iCUE software. I'll put a link down in the description to make your life a little bit easier so you don't have to go searching the Googles. And yeah, just continue with the installation

 I've already plugged the other end to the motherboard because I didn't feel like I needed to film that again. And when you power your system up, it should look a little something like this. Now we're going to jump into Corsair's iCUE software to control all of these bits. Go on over to Corsair's website and download the iCUE software

HOW TO Corsair LL120 & LL140 RGB Fan Easy Installation & Setup Guide

walmart

Corsair LL120 RGB

Reviews

Top reviews

Specs

QUICK QUESTION!

You might also like